Power loss and electromagnetic energy density in a dispersive metamaterial medium

The power loss and electromagnetic energy density of a metamaterial consisting of arrays of wires and split-ring resonators (SRRs) are investigated. We show that a field energy density formula can be derived consistently from both the electrodynamic (ED) approach and the equivalent circuit (EC) approach. The derivations are based on the knowledge of the dynamical equations of the electric and magnetic dipoles in the medium and the correct form of the power loss. We discuss the role of power loss in determining the form of energy density and explain why the power loss should be identified first in the ED derivation. When the power loss is negligible and the field is harmonic, our energy density formula reduces to the result of Landau's classical formula. For the general case with finite power loss, our investigation resolves the apparent contradiction between the previous results derived by the EC and ED approaches.Comment: 10 pages, 1 figure, Submitted to Phys. Rev.

Consumer Willingness to Pay and Marketing Opportunities for "Quality Guaranteed Tree-Ripened Peaches" in New York State

This study identifies consumer characteristics associated with willingness to pay a higher price for quality guaranteed tree-ripened peaches, with a focus on evaluating factors important to consumers when making decisions to purchase tree-ripened peaches. Telephone interviews were conducted with consumers in New York State in summer, 2002. Seventy-eight percent of the 258 survey respondents reported that they were willing to pay a higher price. A logistical regression model of willingness to pay was estimated. The empirical results indicated that willingness to pay was positively affected by the existence of previous experiences in purchasing tree-ripened peaches and by consumer dissatisfaction with peaches consumed in the past. An analysis of consumer experiences and consumer dissatisfaction showed that consumers in the two identified segments had mutually exclusive characteristics that present marketing opportunities for high quality New York-grown peaches.Consumer/Household Economics,

Very small grains in the Milky Way and external galaxies

These studies of the infrared colors of reflection nebulae, HL HI clouds, HII regions and external galaxies have shown the following results. Different classes of objects locate in different regions on the R vs F sub v (60)/F sub v (100) diagram. This is determined both by differences in dust properties and by differences in the illuminating radiation field. For example, HL clouds and reflection nebulae almost have the same behavior since both are in the diffuse Interstellar Medium (ISM) and can be expected to have similar grain populations; the small difference in their infrared colors can be explained by the difference of the illuminating radiation field. On the other hand, the dramatic difference of R=vF sub v (12)/F sub v (far IR) between HII region and diffuse ISM may be due to the destruction of the Very Small Grain (VSG) component in the HII regions, although radiation transfer effects may play a part as well. The ratio R=vF sub v (12)/F sub v (far IR) is approximately constant in normal spiral galaxies. This implies that the mass ratio b=Mass (VSG)/Mass (dust) does not vary greatly from one galaxy to another

Composite study of aerosol export events from East Asia and North America

We use satellite observations of aerosol optical depth (AOD) from the Moderate Resolution Imaging Spectrometer (MODIS) together with the GEOS-Chem global chemical transport model to contrast export of aerosols from East Asia and North America during 2004–2010. The GEOS-Chem model reproduces the spatial distribution and temporal variations of Asian aerosol outflow generally well, although a low bias (−30%) is found in the model fine mode AOD, particularly during summer. We use the model to identify 244 aerosol pollution export events from E. Asia and 251 export events from N. America over our 7-year study period. When these events are composited by season, we find that the AOD in the outflow is enhanced by 50–100% relative to seasonal mean values. The composite Asian plume splits into one branch going poleward to the Arctic in 3–4 days, with the other crossing the Pacific Ocean in 6–8 days. A fraction of the aerosols is trapped in the subtropical Pacific High during spring and summer. The N. American plume travels to the northeast Atlantic, reaching Europe after 4–5 days. Part of the composite plume turns anticyclonically in the Azores High, where it slowly decays. Both the Asian and N. American export events are favored by a dipole structure in sea-level pressure anomalies, associated with mid-latitude cyclone activity over the respective source regions. This dipole structure during outflow events is a strong feature for all seasons except summer, when convection becomes more important. The observed AOD in the E. Asian outflow exhibits stronger seasonality, with a spring maximum, than the N. American outflow, with a broad spring/summer maximum. The large spring AOD in the Asian outflow is the result of enhanced sulfate and dust aerosol concentrations, but is also due to a larger export efficiency of sulfate and SO<sub>2</sub> from the Asian boundary layer relative to the N. American boundary layer. While the N. American sulfate outflow is mostly found in the lower troposphere (1–3 km altitude), the Asian sulfate outflow occurs at higher altitudes (2–6 km). In the Asian outflow 42–59% of the sulfate column is present above 2 km altitude, with only 24–35% in the N. American outflow. We link this to the factor of 2–5 lower precipitation in the warm conveyor belts (WCB) of midlatitude cyclones over E. Asia compared to N. America. This relative lack of precipitation makes Asian WCB very efficient for injecting aerosols in the middle troposphere

Contact of Single Asperities with Varying Adhesion: Comparing Continuum Mechanics to Atomistic Simulations

Atomistic simulations are used to test the equations of continuum contact mechanics in nanometer scale contacts. Nominally spherical tips, made by bending crystals or cutting crystalline or amorphous solids, are pressed into a flat, elastic substrate. The normal displacement, contact radius, stress distribution, friction and lateral stiffness are examined as a function of load and adhesion. The atomic scale roughness present on any tip made of discrete atoms is shown to have profound effects on the results. Contact areas, local stresses, and the work of adhesion change by factors of two to four, and the friction and lateral stiffness vary by orders of magnitude. The microscopic factors responsible for these changes are discussed. The results are also used to test methods for analyzing experimental data with continuum theory to determine information, such as contact area, that can not be measured directly in nanometer scale contacts. Even when the data appear to be fit by continuum theory, extracted quantities can differ substantially from their true values

Summed Parallel Infinite Impulse Response (SPIIR) Filters For Low-Latency Gravitational Wave Detection

With the upgrade of current gravitational wave detectors, the first detection of gravitational wave signals is expected to occur in the next decade. Low-latency gravitational wave triggers will be necessary to make fast follow-up electromagnetic observations of events related to their source, e.g., prompt optical emission associated with short gamma-ray bursts. In this paper we present a new time-domain low-latency algorithm for identifying the presence of gravitational waves produced by compact binary coalescence events in noisy detector data. Our method calculates the signal to noise ratio from the summation of a bank of parallel infinite impulse response (IIR) filters. We show that our summed parallel infinite impulse response (SPIIR) method can retrieve the signal to noise ratio to greater than 99% of that produced from the optimal matched filter. We emphasise the benefits of the SPIIR method for advanced detectors, which will require larger template banks.Comment: 9 pages, 6 figures, for PR

Including SMT Ferrite Beads in DC Power Bus and High-Speed I/O Line Modeling

Surface mount technology (SMT) ferrite beads are often used in high-speed digital circuit designs to mitigate noise. The common modeling approach is to include SMT ferrite beads as equivalent lumped LCR circuits. The work presented in this paper included SMT ferrite beads as a frequency-dependent impedance in a PEEC-like modeling tool denoted CEMPIE, a circuit extraction approach based on a mixed-potential integral equation formulation. Agreement with measurements demonstrates the approach. The applications shown are segmentation of power areas for noise isolation, and I/O line filtering

In vitro mutagenesis of Cymbidium La bell “Anna Belle” by γ-rays irradiation and oligochitosan interaction

The optimum media for multiplication of protocorm like bodies (PLBs) and shoot buds of Cymbidium La bell “Anna Belle” were studied in order to prepare the in vitro samples for irradiation. The values of LD50 (lethal dose of 50% samples) of PLBs, shoot buds and plantlets of tested Cymbidium after cultivation of 4 months were also determined about 35.0, 41.0 and 83.1 Gy, respectively. The addition of oligochitosan played as an very important trigger for promotion on the generation of shoot bud from PLBs after irradiation. The in vitro variations have been generated by γ-rays irradiation of PLBs with doses in range of 20 - 50 Gy. The highest mutant frequency (3.83‰) of C. La bell was found by the irradiation of PLB samples at 30 Gy. The different properties of obtained in vitro variations compared to wild types were found to be chlorophyll, short leaves, long leaves, and violet pericardium variations. The genetic relationships among generated variant lines in M1V4 and wild type were analyzed using RAPD techniques

Optimal Energy Dissipation in Sliding Friction Simulations

Non-equilibrium molecular dynamics simulations, of crucial importance in sliding friction, are hampered by arbitrariness and uncertainties in the removal of the frictionally generated Joule heat. Building upon general pre-existing formulation, we implement a fully microscopic dissipation approach which, based on a parameter-free, non-Markovian, stochastic dynamics, absorbs Joule heat equivalently to a semi-infinite solid and harmonic substrate. As a test case, we investigate the stick-slip friction of a slider over a two-dimensional Lennard-Jones solid, comparing our virtually exact frictional results with approximate ones from commonly adopted dissipation schemes. Remarkably, the exact results can be closely reproduced by a standard Langevin dissipation scheme, once its parameters are determined according to a general and self-standing variational procedure